V1-GP Pedals by V-Racing in cooperation with ECCI

Description

Mounting

All of the individual parts of the V1-GP Pedals are made of the highest quality steel and aluminum and will provide you with years of hassle-free sim racing.

The V1-GP pedals feature the ultra-realistic ECCI PMBII Stage 3 racing brake, a "must have" for any sim racer who wants to brake more consistently. The brake is so good because as you increase the amount of pressure being applied on the brake, the resistance increases as well. It mimics the feel of the brake in a real racing car and will give you a more effective and precise braking feel.

The Stage 3 brake is optimal for those who like to push hard on the brakes and is very well suited for the high braking forces that can be achieved from a low sitting position. 

The total travel of the Stage 3 brake is only 13mm. The short travel of both the throttle and the brake is crucial to minimize foot + leg fatigue in the low-sitting position. With excessive travel, the foot and leg become tired and the end result is discomfort and less consistent brake and throttle action.

The V1-GP Pedals are a F1 style pedal made to fit into low sitting racing simulators / F1 cockpits such as the VRS-P1 and VRS-01. The pedals can be used in any simulator which have horisontal base for mounting.

If you already have a an ECCI Steering System, you can connect the pedals directly to the built-in interface.

The HDUSB Stand-Alone Interface is required for those who do not have an ECCI Steering System and will allow you to "plug and play".

The V1-GP Pedals work only with PC.

The custom mounting brackets provide for mounting in 2 vertical positions. The pedal faces are also adjustable in the vertical, so there isn't a foot size that is too big or small for the V1-GP Pedals.

The tilt angle of the pedals is adjustable to account for mounting angle and personal preference.

Dimensions

Compatibility

Weight: approximately 10 kg
Dimensions: 27cm x 24cm x 30cm (L x W x H)

The V1-GP Pedals are a F1 style pedal made to fit into low sitting racing simulators / F1 cockpits such as the VRS-P1 and VRS-01. The pedals can be used in any simulator which have horisontal base for mounting.

If you already have a an ECCI Steering System, you can connect the pedals directly to the built-in interface.

The HDUSB Stand-Alone Interface is required for those who do not have an ECCI Steering System and will allow you to "plug and play".

The V1-GP Pedals work only with PC. All of the major simulation games are supported.

Watch Video of V1-GP on:

V1-GP Pedals work with: